Menu

Cutting Curves using a Jigsaw 101 

0 Comment

The jigsaw has now become a common name associated with working with wood.  The capability of this device is insane. It can make your life easy by crafting and embellishing material for you. However, you need to handle the device and steer it to its destination. The machine is the most legitimate tool for all your cutting needs. Handling a jigsaw is generally simple and few things kept in mind can bring near perfect results without much effort. The things that are needed to be kept in mind are listed down in this article. Let us now see how it is done. 

The purpose of cutting curves 

There could be numerous reasons why you should be going for curved finishes. Your needs can include anything from creating an ornament from wood to giving shape to the wheel of a go-kart. What remains intact is that a jigsaw only can help you pull off such tasks without actually running to a carpenter. In fact, bringing the finesse of a factory to the comfort of your home is the most important facet of a jigsaw. We will see under the following heading how you can leverage the utility of a jigsaw to achieve the desired finesse.  

The procedure for cutting a curve 

It is recommended that you go through the steps listed under thoroughly and follow them with pure fidelity to avoid any potential mishaps or bad results. Also, ensure that you do not begin without your safety gear. 

  • The first thing to do is to select the apt blade for your workspace. You need to bear in mind the kind of specimen you intend to use the device with. Choose a blade for soft or hard material accordingly. 
  • Now push the blade into your jigsaw. 
  • Before you begin to run the blade, mark the territory using precision tools such as a compass. The line you draw with a marker is supposed to be your path. 
  • Do not forget to drill a starter hole in the right position that is broad enough to accommodate the blade installed on your jigsaw. 
  • We also recommend that you go for a cutting guide to add extra precision to your work. 
  • Pull the trigger of jigsaw to bring it to life. It is going to take a short while for the blade to attain a speed to keep it going. Unless the full speed is achieved by the jigsaw blade, it must not be brought near the specimen. 
  • Once the speed has been achieved, move the blade toward the edge of your wood specimen and let it run up to the starter hole and then precisely following the line that you marked earlier on. 
  • The precision is now in your hands. The accuracy of the machine is good enough but you need to keep your hands steady while working. 

This sums up the basic tutorial for cutting a curve using a jigsaw. Be sure not to overlook any instruction when working. Happy sawing! 

Leave a Reply

Your email address will not be published. Required fields are marked *